 |
| Quantity: | |
|---|---|
775
Ritscher
Overview
The 540 Series is an advanced, solar-optimized Brushless DC (BLDC) motor engineered specifically for direct-drive water pumping applications in off-grid and sustainable irrigation systems. Designed to maximize energy harvest from photovoltaic (PV) panels, this motor converts variable solar DC power into highly efficient, reliable mechanical rotation to drive centrifugal, diaphragm, or helical rotor pumps. It is the core of modern, maintenance-free solar pumping solutions for agriculture, livestock, and remote water supply.
Key Features & Advantages
Ultra-High Efficiency & MPPT Compatibility: Engineered with low-loss materials and optimized magnetic circuits to achieve peak efficiencies often exceeding 90%. Its electrical characteristics are ideally matched with Maximum Power Point Tracking (MPPT) solar charge controllers, ensuring maximum water output per watt of solar energy, especially under low-light conditions.
Wide Voltage Operating Range: Specifically designed to operate efficiently across the variable voltage output of a solar array (e.g., 12V to 48V DC or higher). It maintains performance as panel voltage fluctuates with sunlight intensity, eliminating the need for bulky batteries in many direct solar-to-water systems.
Low Start-Up Power & Soft Start: Requires very low initial current to begin rotation, allowing the pump to start early in the morning with minimal sunlight. Integrated soft-start functionality in the controller reduces mechanical stress on the pump and prevents stalling.
Robust, Maintenance-Free Construction: The sealed, brushless design is built for continuous outdoor operation. It features corrosion-resistant materials, IP68-rated waterproofing for submerged models, and long-life bearings, requiring zero routine maintenance—a critical advantage for remote installations.
Direct Drive & High Torque at Low Speeds: Often configured as a high-torque, low-speed external rotor motor, allowing for direct coupling to the pump impeller without gears or belts. This simplifies the system, reduces energy losses, and provides high starting torque to overcome initial pump head pressure.
Built-in Smart Protection: The accompanying solar pump controller provides comprehensive protection against dry running, over-current, over-voltage, and motor overheating, safeguarding the investment in harsh environments.
Quiet & Sustainable Operation: Produces minimal noise and vibration, and uses no fossil fuels, offering a silent and clean water pumping solution.
Typical Specifications
Motor Type: 3-Phase, Sensorless Brushless DC Motor (external rotor common for pumps).
Frame Designation: 540 Series (optimized for solar hydraulic power).
Solar Input Voltage Range: 12V-24V, 24V-48V, or 48V-96V DC (matched to solar panel configuration).
Rated Power: Typically ranges from 100W to 800W, covering a wide range of lift and flow requirements.
Speed Control: Speed automatically varies with available solar power, optimizing daily water yield.
Protection Class: Up to IP68 for fully submersible pump units; IP65 for surface-mounted motors.
Controller Interface: Dedicated solar pump controller with MPPT algorithm, LCD display for status, and optional remote monitoring.
Primary Applications
This motor is the heart of efficient solar water pumping systems for:
Agricultural Irrigation: Drip and micro-sprinkler systems for crops, orchards, and greenhouses.
Livestock Watering: Providing reliable water to remote pastures.
Domestic & Village Water Supply: Filling storage tanks for homes and small communities.
Pool & Fountain Circulation: Energy-efficient water features and pool cleaning.
Water Transfer & Drainage: Moving water from ponds, rivers, or wells.
Why Choose the 540 Series Solar Pump BLDC Motor?
For system integrators and end-users, this motor represents the pinnacle of solar water pumping technology. It directly translates free solar energy into valuable water with unmatched efficiency and reliability. By eliminating fuel costs, complex maintenance, and grid dependency, it provides a sustainable, cost-effective, and long-term water solution. Its rugged, "set-and-forget" design makes it the ideal choice for bringing water to the world's most remote and sun-rich areas.
Note: System design is crucial. Pump performance (flow rate and lift) is determined by the combination of motor power, pump type (surface vs. submersible), total dynamic head (TDH), and solar irradiance. Proper sizing of the solar array and controller is essential for optimal performance. Custom configurations for specific voltage, shaft, and pump head are available.
Overview
The 540 Series is an advanced, solar-optimized Brushless DC (BLDC) motor engineered specifically for direct-drive water pumping applications in off-grid and sustainable irrigation systems. Designed to maximize energy harvest from photovoltaic (PV) panels, this motor converts variable solar DC power into highly efficient, reliable mechanical rotation to drive centrifugal, diaphragm, or helical rotor pumps. It is the core of modern, maintenance-free solar pumping solutions for agriculture, livestock, and remote water supply.
Key Features & Advantages
Ultra-High Efficiency & MPPT Compatibility: Engineered with low-loss materials and optimized magnetic circuits to achieve peak efficiencies often exceeding 90%. Its electrical characteristics are ideally matched with Maximum Power Point Tracking (MPPT) solar charge controllers, ensuring maximum water output per watt of solar energy, especially under low-light conditions.
Wide Voltage Operating Range: Specifically designed to operate efficiently across the variable voltage output of a solar array (e.g., 12V to 48V DC or higher). It maintains performance as panel voltage fluctuates with sunlight intensity, eliminating the need for bulky batteries in many direct solar-to-water systems.
Low Start-Up Power & Soft Start: Requires very low initial current to begin rotation, allowing the pump to start early in the morning with minimal sunlight. Integrated soft-start functionality in the controller reduces mechanical stress on the pump and prevents stalling.
Robust, Maintenance-Free Construction: The sealed, brushless design is built for continuous outdoor operation. It features corrosion-resistant materials, IP68-rated waterproofing for submerged models, and long-life bearings, requiring zero routine maintenance—a critical advantage for remote installations.
Direct Drive & High Torque at Low Speeds: Often configured as a high-torque, low-speed external rotor motor, allowing for direct coupling to the pump impeller without gears or belts. This simplifies the system, reduces energy losses, and provides high starting torque to overcome initial pump head pressure.
Built-in Smart Protection: The accompanying solar pump controller provides comprehensive protection against dry running, over-current, over-voltage, and motor overheating, safeguarding the investment in harsh environments.
Quiet & Sustainable Operation: Produces minimal noise and vibration, and uses no fossil fuels, offering a silent and clean water pumping solution.
Typical Specifications
Motor Type: 3-Phase, Sensorless Brushless DC Motor (external rotor common for pumps).
Frame Designation: 540 Series (optimized for solar hydraulic power).
Solar Input Voltage Range: 12V-24V, 24V-48V, or 48V-96V DC (matched to solar panel configuration).
Rated Power: Typically ranges from 100W to 800W, covering a wide range of lift and flow requirements.
Speed Control: Speed automatically varies with available solar power, optimizing daily water yield.
Protection Class: Up to IP68 for fully submersible pump units; IP65 for surface-mounted motors.
Controller Interface: Dedicated solar pump controller with MPPT algorithm, LCD display for status, and optional remote monitoring.
Primary Applications
This motor is the heart of efficient solar water pumping systems for:
Agricultural Irrigation: Drip and micro-sprinkler systems for crops, orchards, and greenhouses.
Livestock Watering: Providing reliable water to remote pastures.
Domestic & Village Water Supply: Filling storage tanks for homes and small communities.
Pool & Fountain Circulation: Energy-efficient water features and pool cleaning.
Water Transfer & Drainage: Moving water from ponds, rivers, or wells.
Why Choose the 540 Series Solar Pump BLDC Motor?
For system integrators and end-users, this motor represents the pinnacle of solar water pumping technology. It directly translates free solar energy into valuable water with unmatched efficiency and reliability. By eliminating fuel costs, complex maintenance, and grid dependency, it provides a sustainable, cost-effective, and long-term water solution. Its rugged, "set-and-forget" design makes it the ideal choice for bringing water to the world's most remote and sun-rich areas.
Note: System design is crucial. Pump performance (flow rate and lift) is determined by the combination of motor power, pump type (surface vs. submersible), total dynamic head (TDH), and solar irradiance. Proper sizing of the solar array and controller is essential for optimal performance. Custom configurations for specific voltage, shaft, and pump head are available.
