 |
| Quantity: | |
|---|---|
Overview
This is a specialized, heavy-duty AC electrical motor designed specifically for the demanding environment of BBQ grills and smokers. Engineered to power rotisserie spits, auger feeders for pellet grills, or other slow-turning mechanisms, this motor delivers reliable, continuous torque at low speeds, ensuring even cooking, precise fuel delivery, and hassle-free operation through long smoking or roasting sessions.
Key Features & Advantages
Slow & Steady, High-Torque Drive: Optimized for very low output speeds (typically 1-6 RPM) with high torque to smoothly rotate heavily loaded spits or drive pellet augers against compression, ensuring even cooking and consistent fuel feed without stalling.
Built for Heat & Grease: Features a totally enclosed housing (often cast aluminum or robust steel) to protect internal components from grease splatter, smoke, moisture, and high ambient temperatures commonly found near grills and smokers.
Continuous Duty & Reliability: Rated for 100% duty cycle (S1), capable of running for many hours unattended. Utilizes a simple and robust shaded-pole, permanent split capacitor (PSC), or synchronous gearmotor design with minimal failure points for maximum dependability.
Thermally Protected: Equipped with an embedded automatic-reset thermal overload protector to prevent motor burnout in case of accidental jam or extreme overheating, enhancing safety and longevity.
Simple Mounting & Compatibility: Designed with standard mounting brackets or flanges that align with common rotisserie kits and grill/smoker frames. Output shaft is typically configured for a standard hexagonal socket or pin to easily connect to spit rods or auger drives.
Quiet & Vibration-Free Operation: Engineered to operate smoothly and quietly, avoiding disruptive noise that could detract from the outdoor experience.
Weather & Element Resistant: Construction materials and seals offer resistance to outdoor conditions, though not typically submersible.
Typical Specifications
Motor Type: AC Shaded Pole, AC Synchronous (Gearmotor), or AC Permanent Split Capacitor (PSC) Motor.
Power Supply: AC 120V, 60Hz (North America) or AC 220-240V, 50/60Hz (International).
Output Speed: 1 to 6 RPM (for rotisserie); 2 to 20 RPM (for pellet auger drives).
Output Torque: High, sufficient to rotate 50+ lbs (23+ kg) on a spit or drive a full auger tube.
Duty Cycle: Continuous (S1).
Rotation: Unidirectional (clockwise or counter-clockwise as specified).
Mounting: Universal bracket or side-mount flange.
Shaft: Hexagonal drive socket (common for rotisserie) or keyed/D-cut shaft (for direct coupling).
Enclosure: Totally Enclosed (TENV) or similar.
Primary Applications
Rotisserie Systems for: Charcoal grills, gas grills, kamado-style cookers, and dedicated outdoor ovens.
Pellet Grill/Smoker Auger Drives: For precise, automated fuel delivery.
Charcoal/Heat Deflector Rotators in some premium grills.
Why Choose This BBQ Motor?
This is not a standard motor; it is purpose-built for the BBQ environment. It trades high speed for unwavering, reliable torque at the exact slow pace needed for perfect results. Its rugged, enclosed construction shrugs off grease and heat, while its thermal protection guards against mishaps. For grill manufacturers and serious pitmasters, this motor is the reliable, set-and-forget power source that ensures every cook is evenly roasted and expertly smoked.
Note: This product description distinguishes the application-specific "BBQ Motor" from a general-purpose Stepper Motor, which is a digitally-controlled, precision positioning device not typically used in this rugged, continuous-duty thermal environment. The BBQ motor prioritizes brute-force reliability over precise angular control.
Our company FAQ for you
Our company FAQ for you
(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.
(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we'd love to provide samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it's also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.
Overview
This is a specialized, heavy-duty AC electrical motor designed specifically for the demanding environment of BBQ grills and smokers. Engineered to power rotisserie spits, auger feeders for pellet grills, or other slow-turning mechanisms, this motor delivers reliable, continuous torque at low speeds, ensuring even cooking, precise fuel delivery, and hassle-free operation through long smoking or roasting sessions.
Key Features & Advantages
Slow & Steady, High-Torque Drive: Optimized for very low output speeds (typically 1-6 RPM) with high torque to smoothly rotate heavily loaded spits or drive pellet augers against compression, ensuring even cooking and consistent fuel feed without stalling.
Built for Heat & Grease: Features a totally enclosed housing (often cast aluminum or robust steel) to protect internal components from grease splatter, smoke, moisture, and high ambient temperatures commonly found near grills and smokers.
Continuous Duty & Reliability: Rated for 100% duty cycle (S1), capable of running for many hours unattended. Utilizes a simple and robust shaded-pole, permanent split capacitor (PSC), or synchronous gearmotor design with minimal failure points for maximum dependability.
Thermally Protected: Equipped with an embedded automatic-reset thermal overload protector to prevent motor burnout in case of accidental jam or extreme overheating, enhancing safety and longevity.
Simple Mounting & Compatibility: Designed with standard mounting brackets or flanges that align with common rotisserie kits and grill/smoker frames. Output shaft is typically configured for a standard hexagonal socket or pin to easily connect to spit rods or auger drives.
Quiet & Vibration-Free Operation: Engineered to operate smoothly and quietly, avoiding disruptive noise that could detract from the outdoor experience.
Weather & Element Resistant: Construction materials and seals offer resistance to outdoor conditions, though not typically submersible.
Typical Specifications
Motor Type: AC Shaded Pole, AC Synchronous (Gearmotor), or AC Permanent Split Capacitor (PSC) Motor.
Power Supply: AC 120V, 60Hz (North America) or AC 220-240V, 50/60Hz (International).
Output Speed: 1 to 6 RPM (for rotisserie); 2 to 20 RPM (for pellet auger drives).
Output Torque: High, sufficient to rotate 50+ lbs (23+ kg) on a spit or drive a full auger tube.
Duty Cycle: Continuous (S1).
Rotation: Unidirectional (clockwise or counter-clockwise as specified).
Mounting: Universal bracket or side-mount flange.
Shaft: Hexagonal drive socket (common for rotisserie) or keyed/D-cut shaft (for direct coupling).
Enclosure: Totally Enclosed (TENV) or similar.
Primary Applications
Rotisserie Systems for: Charcoal grills, gas grills, kamado-style cookers, and dedicated outdoor ovens.
Pellet Grill/Smoker Auger Drives: For precise, automated fuel delivery.
Charcoal/Heat Deflector Rotators in some premium grills.
Why Choose This BBQ Motor?
This is not a standard motor; it is purpose-built for the BBQ environment. It trades high speed for unwavering, reliable torque at the exact slow pace needed for perfect results. Its rugged, enclosed construction shrugs off grease and heat, while its thermal protection guards against mishaps. For grill manufacturers and serious pitmasters, this motor is the reliable, set-and-forget power source that ensures every cook is evenly roasted and expertly smoked.
Note: This product description distinguishes the application-specific "BBQ Motor" from a general-purpose Stepper Motor, which is a digitally-controlled, precision positioning device not typically used in this rugged, continuous-duty thermal environment. The BBQ motor prioritizes brute-force reliability over precise angular control.
Our company FAQ for you
Our company FAQ for you
(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.
(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we'd love to provide samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it's also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.
